DIY Installation
Free Installation Service*
*Installations are free of charge for orders above Rs 10,000. Otherwise, an additional Rs 1,000 will be invoiced to you on your order for the installation done by Blinds.mu Ltd team.
Just give us a call on 5880 5880
or email us and our team will get in touch with you.
Tools you will need
- Carpenter's level
- Measuring tape
- Pencil
- Screwdriver
- Drill and bits
How to install your blinds instructions
Horizontal Venetian Blinds (25mm)
Horizontal Wooden Blinds (50mm)
Vertical Blinds
Fabric Roller Blinds
Bamboo Roller Blinds
How to install Horizontal Venetian Blinds (25mm) - Inside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Place the head rail of the blind at the position you desire to install. (Make sure that it is level and has no obstruction). Mark spot where brackets will be placed. | |
| 2 | Put brackets at the reference marks. Mark the mounting holes for screws and drill. |  |
| 3 | Slide the blind head rail into brackets and lock brackets to secure the rail. |  |
| 4 | Pull down cord to the left to release blinds. |  |
How to use your blinds
You should always use the wand rod (white transparent stick) to tilt open the slats before opening or closing your blinds. Then only can you pull the cord to the left to lift the blinds and pull cord to the right to lock it. All cords must be pulled together.
Maintenance
Dust with a soft clean cloth or dusting mitt. Dust is easily brushed off, especially when cleaned at regular intervals. Avoid using harsh chemicals and cleaners.
How to install Horizontal Venetian Blinds (25mm) - Outside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Place the head rail of the blind at the position you desire to install. (Make sure that it is level and has no obstruction). Mark spot where brackets will be placed. Put brackets at the reference marks. Mark the mounting holes for screws and drill. |  |
| 2 | Slide the blind head rail into brackets and lock brackets to secure the rail. |  |
| 3 | Pull down cord to the left to release blinds. | |
How to use your blinds
You should always use the wand rod (white transparent stick) to tilt open the slats before opening or closing your blinds. Then only can you pull the cord to the left to lift the blinds and pull cord to the right to lock it. All cords must be pulled together.
Maintenance
Dust with a soft clean cloth or dusting mitt. Dust is easily brushed off, especially when cleaned at regular intervals. Avoid using harsh chemicals and cleaners.
How to install Horizontal Wooden Blinds (25mm) - Inside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Before installing wooden blinds, make sure that you are aware of all components positions inside the track. The brackets can only be installed in between the components of the Venetian head rail. Drill the necessary holes and insert wall plug. Insert the screw through bracket fixing hole and fix the bracket. |  |
| 2 | Position head rail up over the swivel bracket and push closed the extension arm to the right. |  |
| 3 | Pull down cord to the left to release blinds. | |
How to use your blinds
You should always use the wand rod (white transparent stick) to tilt open the slats before opening or closing your blinds. Then only can you pull the cord to the left to lift the blinds and pull cord to the right to lock it. All cords must be pulled together.
How to care for your blinds
- Dust can easily be removed regularly using a feather duster (plumeau) or a vacuum cleaner with a brush attachment.
- To dust, tilt the slats up and then down (but not entirely closed) to reach the entire top and bottom surfaces.
- To vacuum, use the brush attachment end, tilt slats up and then down (but not entirely closed) to reach the entire top and bottom surfaces.
- Wooden blinds can also be cleaned using a dry wood polish in liquid form which can be applied by hand.
WE ULTIMATELY RECOMMEND THAT YOUR BLINDS BE CLEANED BY HIGH TECH CLEANERS.
How to install Horizontal Wooden Blinds (25mm) - Outside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Before installing wooden blinds, make sure that you are aware of all components positions inside the track. The brackets can only be installed in between the components of the Venetian head rail. Drill the necessary holes and insert wall plug. Insert the screw through bracket fixing hole and fix the bracket. |  |
| 2 | Position head rail up over the swivel bracket and push closed the extension arm to the right. |  |
| 3 | Pull down cord to the left to release blinds. | |
How to use your blinds
You should always use the wand rod (white transparent stick) to tilt open the slats before opening or closing your blinds. Then only can you pull the cord to the left to lift the blinds and pull cord to the right to lock it. All cords must be pulled together.
How to care for your blinds
- Dust can easily be removed regularly using a feather duster (plumeau) or a vacuum cleaner with a brush attachment.
- To dust, tilt the slats up and then down (but not entirely closed) to reach the entire top and bottom surfaces.
- To vacuum, use the brush attachment end, tilt slats up and then down (but not entirely closed) to reach the entire top and bottom surfaces.
- Wooden blinds can also be cleaned using a dry wood polish in liquid form which can be applied by hand.
WE ULTIMATELY RECOMMEND THAT YOUR BLINDS BE CLEANED BY HIGH TECH CLEANERS.
How to install Vertical Blinds - Inside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Place the head rail on the casing. Make sure that it is level and has no obstruction even if your window is not level. Mark each end of the head rail. Make pencil marks below the head rail on each end. Install the brackets. Hold the end in place and mark for pilot screw holes. Use a level to make sure each set of holes is even with the others. Drill the holes for the screws and install the brackets. |  |
| 2 | Install the head rail. Place the head rail into the brackets and lock it in place. |  |
Maintenance
Treat the blinds as you would any fine wood furniture. Dust with a soft clean cloth or dusting mitt. Dust is easily brushed off, especially when cleaned at regular intervals. Avoid using harsh chemicals and cleaners.
How to install Vertical Blinds - Outside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Place the head rail on the casing. Make sure that it is level and has no obstruction even if your window is not level. Mark each end of the head rail. Make pencil marks below the head rail on each end. | |
| 2 | Install the brackets. Hold the end in place and mark for pilot screw holes. Use a level to make sure each set of holes is even with the others. Drill the holes for the screws and install the brackets. |  |
| 3 | Install the head rail. Place the head rail into the brackets and lock it in place. |  |
Maintenance
Treat the blinds as you would any fine wood furniture. Dust with a soft clean cloth or dusting mitt. Dust is easily brushed off, especially when cleaned at regular intervals. Avoid using harsh chemicals and cleaners.
How to install Fabric Roller Blinds - Inside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Drill the necessary holes and insert wall plugs (recommended 5.5mm drill bits for 6mm wall plugs). Insert the screw through bracket fixing hole and tighten firmly. |  |
| 2 | For recess fit, install brackets on either side of window. Mark and install brackets apart with respect to the total width size of the roller blind order. Insert the roller blind ends into the bracket slots with the fabric positioned behind the roll. |  |
| 3 | Two chain connectors are applied on the control chain as a roller drop control stopper. This is to control the level of the drop above the window sill (i.e. +-10mm) or to just below the roller head tail when rolled up or down. |  |
How to care for your blinds
- Use a vacuum cleaner on a regular basis to keep the dust from the blinds.
- Only wash the blinds once they are really dirty
- Let the blinds soak in cold water with a mild detergent
- It is not recommended to scrub fabric excessively
- Do not crease the blinds during the cleaning and drying process
- Hang the roller blind in a shaded area to dry.
WE ULTIMATELY RECOMMEND THAT YOUR BLINDS BE CLEANED BY HIGH TECH CLEANERS.
How to install Fabric Roller Blinds - Outside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Drill the necessary holes and insert wall plug (recommended 5.5mm drill bits for 6mm wall plugs). Insert the screw through bracket fixing hole and tighten firmly. |  |
| 2 | For Face fix fit, (ie wall mount), mark and install brackets apart with respect to the total width size of the roller blind order. Insert the roller blind ends into the bracket slots with the fabric positioned behind the roll. |  |
| 3 | Two chain connectors are applied on the control chain as a roller drop control stopper. This is to control the level of the drop above the window sill (i.e. +-10mm) or to just below the roller head tail when rolled up or down. |  |
How to care for your blinds
- Use a vacuum cleaner on a regular basis to keep the dust from the blinds.
- Only wash the blinds once they are really dirty
- Let the blinds soak in cold water with a mild detergent
- It is not recommended to scrub fabric excessively
- Do not crease the blinds during the cleaning and drying process
- Hang the roller blind in a shaded area to dry.
WE ULTIMATELY RECOMMEND THAT YOUR BLINDS BE CLEANED BY HIGH TECH CLEANERS.
How to install Bamboo Roller Blinds - Inside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Place the head rail of the blind at the position you desire to install. (Make sure that it is level and has no obstruction). Put reference marks where to put brackets. Mark the mounting holes for screws and drill. |  |
| 2 | Slide the blind head rail into brackets to secure the rail. | |
| 3 | Pull down cord to release blinds. |  |
Maintenance
Dust can easily be brushed off regularly using a feather duster or a vacuum cleaner with a brush attachment. To dust bamboo, roll down blinds to its full drop. To vacuum, use the brush attachment end, once blind has been rolled down. A protector C anti-microbial chemical coating should be applied in advance on bamboo blinds to prevent fungus/mildew occurring and can be applied if blind has already been affected. Blinds.Mu Ltd unfortunately does not commercialise this product yet.
How to install Bamboo Roller Blinds - Outside Mount
| Step | Instruction | More info |
|---|---|---|
| 1 | Place the head rail of the blind at the position you desire to install. (Make sure that it is level and has no obstruction). Put reference marks where to put brackets. Mark the mounting holes for screws and drill. |  |
| 2 | Slide the blind head rail into brackets to secure the rail. |  |
| 3 | Pull down cord to release blinds. |  |
Maintenance
Dust can easily be brushed off regularly using a feather duster or a vacuum cleaner with a brush attachment. To dust bamboo, roll down blinds to its full drop. To vacuum, use the brush attachment end, once blind has been rolled down. A protector C anti-microbial chemical coating should be applied in advance on bamboo blinds to prevent fungus/mildew occurring and can be applied if blind has already been affected. Blinds.Mu Ltd unfortunately does not commercialise this product yet.